Instructions – SeamKing

SeamKing How-To Videos

Introduction

How to Mix SeamKing

Materials Needed:

  1. Connect to SeamKing App: (IPhone / Android / Web)
  2. SeamKing resin, hardener, and pigments.
  3. Clean cloth or sponge
  4. Denatured alcohol or acetone
  5. Painter’s tape blue or green (for hard surface materials)
  6. Clamps (if needed)
  7. Protective gloves
  8. Safety goggles

SeamKing How-To Instructions:

  1. Connect to SeamKing App: (IPhone / Android / Web) Before beginning the fabrication process, ensure that you are connected to our SeamKing app. This app will provide crucial information about the slab you are working on and the specific pigmenting instructions required.
  2. Identify Slab: Use the SeamKing app to look up the slab you are working on. This will provide important details about the material and any specific instructions for pigmenting.
  3. Pigmenting Instructions: Follow the pigmenting instructions provided on the SeamKing app for the specific slab you are working on. Ensure that you mix the pigment thoroughly into the resin according to the app’s guidelines.
  4. Confirm Color: Before proceeding to harden the resin, it is crucial to confirm that the color is correct. Compare the mixed resin with the color reference provided on the SeamKing app. Adjust the pigment if necessary to achieve the desired color.
  5. Prepare Hardener: Only use SeamKing hardener with the UV stable bulk resin. Prepare the hardener according to the recommended mix ratio provided by the SeamKing app. The recommended mix ratio is 1%-3%, with a maximum of 15%. Thoroughly mix the hardener with the resin.
  6. Application: Apply the mixed resin to the seams and miters of the slabs that need to be joined together. Ensure even distribution and adequate coverage for a strong bond.
  7. Working Time: The working time for the resin may vary but is generally around 4-7 minutes. Work efficiently to ensure proper application within the allotted time frame.
  8. Fixture Time: After applying the resin, allow it to fixture for 12-15 minutes. During this time, the resin will begin to set, but it will still be malleable enough to make any final adjustments if needed.
  9. Final Checks: Before the resin fully cures, double-check the seams and miters to ensure they are aligned correctly and that there are no air bubbles or imperfections.
  10. Curing: Once the resin has fully cured, it will provide a strong, durable bond. Allow ample time for complete curing before subjecting the fabricated piece to any stress or use.

Following these instructions carefully will ensure a successful fabrication process using UV stable bulk resin with the SeamKing app, resulting in high-quality seams and miters.